A simple wireless weather station with a large and clearly designed UWA display with large numbers and an outdoor sensor. Information about temperature, humidity and weather trends is displayed
The large display shows the values for indoor and outdoor temperature, as well as indoor and outdoor humidity. The time is received via DCF signal.
The weather trend for the next 12 hours is shown graphically. The station has a stand and can be mounted on the wall.
Dimensions 224x23x224 mm/weight 687 g; sensor 60x32x110 mm/weight 120 g; 6x AA (Mignon), 1.5V batteries are required for operation (not included)
Always replace the batteries with completely new ones, a set of full capacity batteries. You don't have to use batteries of different brands, types, or different capacities. Remove the batteries from the device when it is not being used for a long time
Never charge normal, non-rechargeable batteries! You can make this place explode. To avoid voltage damage as a result, use an incorrectly inserted battery
Box contents: weather station, outdoor sensor (max. 3 sensors can be connected), instruction manual
Product Description
Product Description
The BRESSER TemeoTrend JC LCD Weather Clock disposes of the worldwide first "ultra wide angle" (UWA) display. The large presentation and the broad viewing angle provide for an easy reading of the shown information from almost any position in the room.
Always have an eye on indoor and outdoor temperatures and humidity and get the weather forecast for the coming 12 to 24 hours.
Product Advisory:
Depending on your location in the UK you may be able to receive the atomic DCF clock signal from Sindelfingen Germany. This provides your clock with the Central European Time (CET). In order to automatically set your clock to Greenwich Mean Time (GMT) used in the UK please follow the following instructions:
Press and hold the time set button on the back of your device until the digits begin to flash on the LCD display the release the time set button.
Press the time set button to confirm 12 or 24h mode, and again for the hour and for the minute and seconds. Once you reach the time zone setting (00Hr) press the “-“ button once to set 1 hour less than CET, which equals GMT Press the time set button one final time to confirm your setting. You can then press the RCC button on the back to receive the time signal from Germany. Once it is received the clock will display GMT time.
FEATURES
"Ultra Wide Angle" (UWA) Display 191 x 167mm/ 7.5†x 6.6†Radio controlled clock (self setting clock - adjusts for daylight savings time) Alarm Indoor & outdoor temperature Indoor & outdoor humidity 12-24 hours weather forecast Max. and min. temperature memory Wall or desk mounted Supports up to 3 remote sensors
SCOPE OF DELIVERY
1x weather clock 1x outdoor sensor
Box Contains
1 x Weatherstation
433 mhz outdoor sensor
Manual
