Self priming with intelligent flow control, 3 seconds delay start
Auto stop when tap is closed and built in protection, NO water NO power
Self priming with intelligent flow control
Ideal for shower, water circulating, rain water tanks, hot bath tubs and so on
We issue VAT invoice with each purchase
Product Description
KATSU® automatic self-priming pump is a new type of high house pump maintaining efficient, energy-saving and low noise (65DB), widely used in household household, well, tap water, vegetable garden irrigation, water supply and hot water circulation. It is an ideal solution for constant water supply in conditions of insufficient water pressure p>
Model: 151434
Voltage/Frequency: 220 V/50 Hz.
Power: 180 W.
ï¼Amp) 2.0
Max Strike: 25 m
Rated Strike: 12 m
Max flow rate: 2 m & sup3; / h
Suction: 8 metres.
Applicable 3 floors, 1-2 Taps each floor
Turn on pressure: 1.6 bar
Input/Output: 90 degrees, 25 mm.
cable: 20 cm without cap
Installation size: 28x21x29 cm
Weight: 9.5 kg p >
Features:
-Start delay: When the pump is running, it will delay the start by 3 seconds in order to protect the engine and the safety of people.
Pump shut-off – Water stop: The microcomputer control system can detect the water flow and automatically control the pump off/on.
-No water without power supply: The pump will automatically power off if it works 6 minutes without water, and it will automatically restart after one hour to check the status of the water supply until the water supply return.
Intelligent flow control: When the water flow is very low, the microcomputer control system automatically detects and switch to "small flow control mode" to ensure that the pump works well with the low water flow state and avoid "pops pops\ noise. The service life of the pressure switch can be extended greatly and reach the full operation of the head range. P>"
